The main parts of the ultrasonic mask machine are those
① Transmission system:
The transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. We need to check whether there is dust on the outer surface of the motor that affects the heat dissipation, whether the gears and sprockets are oiled, and whether there are attachments. Whether the tightness of the chain is appropriate, whether there are foreign objects, whether the link screws between the transmission parts are loose, etc. Is the lubricating oil of the reducer sufficient? Generally, the lubricating oil needs to be replaced once every 1000 hours to 1500 hours.
Check whether the equipment circuit connector is loose, whether the main power cable, branch signal cable, etc. are worn out? Ageing? Is the electrical device loose? Whether the inside of the electrical box is clean and dry, whether the exhaust fan is working normally, etc.
③Ultrasonic system: (consisting of ultrasonic electric box, vibrator, welding head and connecting wire)
Check whether the ultrasonic system is clean, especially the ultrasonic electric box, vibrator (transducer), and welding head (amplification ratio) must be dry and clean without water, and the connection wire must be firm. Check the degree of wear of the ultrasonic welding head from time to time. Pay attention to the change range of the voltmeter and ammeter pointer on the ultrasonic electric box.
④Air supply system: (composed of air source filter system, air pipe and cylinder)
Check the air filter cup for water? Drain the water, and by the way, drain the air compressor (air compressor drain: in areas with high humidity, drain the air compressor daily). Check for air leaks in the trachea? Is the cylinder leaking? Whether the cylinder magnetic sensor position and working normally.
In addition: the ultrasonic mask machine should not be in contact with corrosive liquids and objects, such as sweat can easily cause rusting of equipment parts. The equipment is not used for a long time such as vacation. Apply anti-rust oil to the transmission system and rust-prone parts of the ultrasonic mask machine.