System maintenance work of ultrasonic mask machine
Ultrasonic equipment system: (consisting of ultrasonic electric box, vibrator, welding head and connecting wire)
Check whether the ultrasonic system is clean, especially the ultrasonic electric box, the vibrator, welding head must be dry, clean and free of water, and the connecting wire must be firm. Check the degree of wear of the ultrasonic welded joints from time to time. Pay attention to the change range of the voltmeter and ammeter pointer on the ultrasonic electric box.
Transmission system: The
transmission system includes motors, gears, reducers, sprockets, chains, conveyor belts and other components. We need to check whether there is dust on the outer surface of the motor that affects heat dissipation, whether the gear and sprocket are oiled, and whether there are accessories. Is the tightness of the chain appropriate, is there any foreign matter, is the connection screw between the transmission parts loose, etc.? Is the lubricating oil of the reducer sufficient? Generally, the lubricant needs to be changed every 1000 to 1500 hours.
Check whether the equipment circuit connector is loose, whether the main power line, branch signal line, etc. are worn, aging, whether the electrical components are loose, whether the electric box is clean and dry, whether the exhaust fan is working properly, etc.
Air supply system: (air source filtration System, air pipe and cylinder composition)
Check if there is a water filter cup in the air? Drain the water and drain the air compressor by the way (the air compressor should be drained: in high humidity areas, the air compressor should be drained daily). Check whether the air pipe is leaking, whether the cylinder is leaking, the position of the cylinder magnetic sensor and whether it is working properly.
Mask automation equipment/ultrasonic automation equipment